DEMETER E1

Power control panel is located in the front and on top of the canopy to allow for easy LED status checking. One-piece body design highly integrates AP2 flight controller, P2 PCU power control unit and receiver in the canopy preventing exposure to dust and moisture.

Satellite Positioning Module with (GPS + Glonass) or (GPS + BDS) provide precise, stable and fast positioning in real-time to avoid drift and frequency issue.

Utilizing the FPV camera the pilot can map a precise route for agricultural spraying. Unlike traditional farming and A-B mapping, the DEMETER FPV camera mapping is efficient, while saving time.

Each sprayer uses a standard fan-shaped nozzle designed to reduced wear and tear to maintain an effective spray pattern also designed to be used on different crops to apply chemicals appropriate for the desired spray application program.
Flexibility to adjust the flow and atomization effect according to required operational needs by choosing either the efficient or strong spray mode. Each sprayer uses a standard fan-shaped nozzle designed to reduced wear and tear to maintain an effective spray pattern. The DEMETER is equipped with four spray nozzles designed to be used on different crops to apply chemicals appropriate for the desired spray application program.

The Ground System APP is used to simplify the configuration of the spray route mapping. Use the drag and drop feature to mark the designated area for spray application. The APP calculates an efficient spray route which is displayed. The spray route can easily be adjusted using the APP. If the amount of liquid, to be sprayed, is entered the Ground System will automatically calculate any remaining parameters, thus conveniently improving the efficiency of route mapping and spray application.
When flying and turning a corner, it'll close Spraying; when moving forward in route, it'll re-start and make sure no Spraying at the same place. If there are buildings or objects, setting obstacle mark to make DEMETER keep away this area spraying.

The Ground Station APP simplifies route mapping to automate flight. A complex mission is quickly programmed to achieve full automation of chemical spraying, applying a uniform application on the crop or farmland. The system is designed to apply the maximum application of chemical in the shortest time to increase efficiency for better results to ensure maximum crop yield.
Flying Altitude: Setup flight altitude.
Flying Speed: Setup flight speed.
Spaying Speed: Setup spaying speed during flight.
Flight Mode of Heading Nose:
- Custom Mode: User setup their own nose heading direction on APP system before flying.
- Auto Mode: The nose heading direction is based on flight controller detection.
- Manual Mode: The nose heading direction is based on users radio control.

When selecting Direct Return three options are available.
1. Fly within a 5-meter range. The APP alerts user before starting the automatic return. Return the original height coordinates and land at a height of 2m above the HOME point.
2. Fly within a 5 to 30-meter range. The APP alerts user before starting the automatic return. The APP prompts for either [original altitude return] or [return after ascending], and then an auto return landing at a height of 2m above the HOME point.
3. Fly in the range of 30-meter away. The APP alerts user before starting the automatic return. The APP prompts for either [return after ascending 10 meters] and landing at a height of 2m above the HOME point.

Note:Auto return speed: 1.5M/s within 5 to 30 meters, 3M or 4M/s outside 30 meters.